TIPS FOR THE INSTALLATION OR MAINTENANCE
I-POSE



See you one of the assemblies?



In the same way as a tile, the assembly is visible on the pavement and nestable base, this coating has been designed for highly stressed areas or aesthetics was not the primary objective.

However, finishing ELIPSE was designed to combine exceptional strength and beauty of assembly. The interlocking is practically invisible!

Moreover, and this is a characteristic of coatings RENOTILE, our tiles can be assembled from different materials or different finishes without problems with assembly quality optimal

You can combine SLABS ECO - TOP PRO OR STD but also finishes-ELIPSE or slip.

On RENOSTILE, the final interlocking tiles is as seamless.



Should it be professional to lay the tiles?
Laying nestable RENOTILE RENOSTILE and is particularly easy to achieve. A handyman (man or woman!) Have no special difficulties. When cutting a jigsaw is ideal.

If the support is uncertain or very damaged, you can either contact us for advice or ask the intervention of a professional order to achieve acceptable installation.

On what basis can we support the use slabs and RENOTILE RENOSTILE?
On the rough concrete troweled smooth or end, it is dyed or painted or covered with a resin. On the floor, or tile, on a linoleum used on the tiles glued on a mix .. there are many possibilities! RENOTILE RENOSTILE and often arise directly over the old coating becoming a true alternative ground.

How do I prepare my soil before asking?
 In case of degraded soil, it is best to ask first but patching a general rule, Filling or localized enough times.

For RENOSTILE, the assembly is invisible, it is recommended in cases of doubt, a patching. This is to maintain the beautiful aesthetics of this slab. Naturally, linoleum or wooden floors and even most of the tiles, this is not always necessary.

 

 How to ask?
The installation from the center of the room

Adjust specifically after positioning virtual tiles to the walls,

Mark a cross (length / width) and place in "Staircase" from the center to the walls.

A notice will be attached to the slabs. Feel free to ask us anytime!

When using ramps, the installation can begin the axis of the main gate based on the previous way.

Attention has ensure that sufficient expansion gap of 3 to 5 mm in the periphery to absorb the expansion resulting from temperature variations. This seal may be supplemented if necessary by the installation of a baseboard finishing lip (contact us if necessary)
 

How to predict the amount of tiles to order?
As for laying another floor covering, it is advisable to take into account 2-5% of tiles and more, depending on the configuration of the room and obstacles



Why ramps?



Ramps and corners access and complete the installation just to catch up the height of the slab with its muzzle. The ramp is intentionally large (20 cm wide) to provide a perfect finish



The tiles have to be glued to the ground?

RENOTILE RENOSTILE and are designed to be installed without glue, this way the removal is as easy as mounting and if the need for replacement of a tile should appear, it would be very easy. Gluing is reserved to a specific operation some situations such as areas of intense maneuvering electric stackers, areas exposed to excessive sunlight (windows) or require high pressure washing.



 

The tiles can be installed outdoors they?
The slabs and RENOTILE RENOSTILE are intended in principle to use indoors, they may exceptionally be installed outdoors under cover, however, an expansion of PVC and a slight reduction in hardness could be detected, so it is advisable to observe temperatures of use (+ 7 ° C to +30 ° C). If you have no other option, you need to glue.

TOP RENOTILE However, because of its unique design in TPE and PVC-free, therefore, do not undergo expansion and can be implemented outdoors (terrace, garden sheds, pool edge, wet or greasy areas) or indoors in rooms cold for example, no worries.

 

 MAINTENANCE

RENOTILE coatings due to their surface structure has a specially designed closed fouling resistance particularly high, so it is not necessary to add any surface treatment
The interview will therefore preferably with a car washer or buffing environments solicited or fringed with a broom and a bucket in domestic applications (eg the garage of the house)

Preferably, use a gentle cleansing foam and chlorine-free.

Contact us if needed.